Enter a player name to begin or load your saved progress.
Are power dividers and directional couplers considered active electronic components primarily utilized for signal amplification?
Answer: False
Explanation: Power dividers and directional couplers are fundamentally passive devices. Their primary function is not signal amplification but rather the controlled distribution or coupling of electromagnetic power.
A primary function of power dividers is to couple a specific amount of electromagnetic power from one transmission line to another.
Answer: True
Explanation: Indeed, a principal role of power dividers (or splitters) is to divide input power into specified output levels, effectively coupling power from the input to the output ports.
Directional couplers are designed to couple power flowing in any direction between their ports.
Answer: False
Explanation: The defining characteristic of a directional coupler is its ability to couple power preferentially in one direction. Power entering the input port is coupled to the coupled port, while power entering the output port is coupled to the isolated port, not the other way around.
Combining signals for antennas is NOT a common application for power dividers or directional couplers.
Answer: False
Explanation: Combining signals for transmission antennas is indeed a common and important application for power dividers and directional couplers, alongside other uses such as signal sampling and isolation.
Using power dividers as multiplexers is inefficient because half the power from each channel is lost at each combining stage.
Answer: True
Explanation: When power dividers are operated in reverse for multiplexing, the inherent design leads to significant power dissipation in the termination resistors at each combining stage, resulting in substantial inefficiency.
Phase-difference couplers can be used to steer antenna beams but not to create nulls.
Answer: False
Explanation: Phase-difference couplers are versatile and can be employed to steer antenna beams as well as to create specific nulls in the radiation pattern, which is valuable for interference mitigation or directional sensing.
The 'Bibliography' section provides definitions for technical terms used in the article.
Answer: False
Explanation: A bibliography typically lists sources consulted or cited. Definitions of technical terms are usually found in a glossary or within the main body of the text, not in the bibliography.
Passivity implies a device can generate power.
Answer: False
Explanation: Passivity means a device does not generate power; it can only consume or dissipate it. Active devices, in contrast, can amplify or generate power.
What is the principal application of passive devices like power dividers and directional couplers in radio technology?
Answer: To couple specific amounts of electromagnetic power between circuits.
Explanation: The fundamental role of these passive devices is to manage and direct electromagnetic power, splitting it or coupling specific portions between different transmission lines or ports.
Which feature uniquely distinguishes directional couplers from simple power splitters?
Answer: Their capability to couple power in only one specific direction.
Explanation: Unlike simple power splitters, directional couplers are designed to exhibit directionality, meaning they preferentially couple power flow in a single, defined direction between ports.
Which of the following is NOT listed as a common application for directional couplers and power dividers?
Answer: Generating the primary carrier wave frequency.
Explanation: While these devices are used for signal manipulation, sampling, combining, and separating, they are not typically employed for the generation of the primary carrier wave frequency itself, which is usually handled by oscillators.
What is the main source of inefficiency when using power dividers as multiplexers?
Answer: Power dissipated in the termination load at each combining stage.
Explanation: When power dividers are used in reverse for multiplexing, the power from each input channel that is not directed to the common output port is dissipated in the termination resistor at that stage, leading to significant power loss.
Phase-difference couplers can be utilized to create which antenna pattern characteristic?
Answer: A null in a specific direction.
Explanation: By precisely controlling the phase relationships between signals feeding an array of antennas, phase-difference couplers can shape the resulting radiation pattern, including the creation of nulls in specific directions.
What is the main inefficiency when power dividers are used as multiplexers?
Answer: Half the power from each channel is lost to a termination load.
Explanation: When power dividers are used in reverse for multiplexing, a significant portion of the input power from each channel is dissipated in the termination resistor at the isolated port of each stage, leading to substantial power loss.
At microwave frequencies, directional couplers are frequently constructed using two closely spaced transmission lines.
Answer: True
Explanation: The coupled-line directional coupler, which utilizes two parallel transmission lines in close proximity to facilitate electromagnetic coupling, is a common and effective implementation at microwave frequencies.
The coupled-line directional coupler is a common implementation type.
Answer: True
Explanation: Yes, the coupled-line design, where coupling occurs between adjacent transmission lines, is one of the most prevalent methods for constructing directional couplers, particularly at microwave frequencies.
Microstrip technology is ideal for λ/4 directional couplers due to its homogeneous nature.
Answer: False
Explanation: Microstrip technology is not homogeneous; it consists of a dielectric substrate between a conductor and a ground plane. This non-homogeneity leads to different propagation velocities for the even and odd modes, causing dispersion and making standard λ/4 designs less accurate compared to homogeneous media like stripline or coaxial lines.
Multi-section couplers can achieve wider bandwidths by adjusting the coupling factor of individual sections.
Answer: True
Explanation: Employing multiple coupled sections, similar to multi-section filters, allows for greater control over the coupler's frequency response, enabling the achievement of wider operational bandwidths.
How are directional couplers commonly constructed for microwave frequencies?
Answer: Using two transmission lines placed close together for coupling.
Explanation: The coupled-line approach, employing two closely spaced transmission lines, is a prevalent method for constructing directional couplers, especially at microwave frequencies where transmission line structures are practical.
What is a limitation of using microstrip technology for λ/4 directional couplers?
Answer: It is not homogeneous, leading to different mode velocities and dispersion.
Explanation: Microstrip is a non-homogeneous transmission line structure. This leads to differing propagation velocities for the even and odd modes, resulting in dispersion and inaccuracies in λ/4 designs compared to homogeneous structures.
How do multi-section coupled-line couplers improve performance?
Answer: By achieving wider bandwidths.
Explanation: Employing multiple coupled sections, similar to multi-section filters, allows for greater control over the coupler's frequency response, enabling the achievement of wider operational bandwidths.
The coupling factor (C_{3,1}) is calculated by dividing the input power by the coupled power, expressed in decibels.
Answer: False
Explanation: The coupling factor is defined as the ratio of the coupled power (P₃) to the input power (P₁), expressed in decibels. The original statement incorrectly reverses this ratio.
A coupling factor greater than 0 dB is theoretically possible for a passive directional coupler.
Answer: False
Explanation: For a passive device, the coupling factor cannot exceed 0 dB. A coupling factor greater than 0 dB would imply power generation, which contradicts the definition of passivity.
In a practical directional coupler, the coupling factor typically does not exceed -3 dB.
Answer: True
Explanation: While theoretically limited to 0 dB, practical directional couplers often have coupling factors around -3 dB or greater (i.e., less negative) for common applications like 3 dB hybrids. The statement implies a limit on how much power can be coupled out, which is generally true for practical designs aiming for specific coupling ratios.
Insertion loss in a directional coupler only accounts for the power directed to the coupled port.
Answer: False
Explanation: Insertion loss encompasses all power dissipated or lost within the device, including dielectric and conductor losses, as well as any power not transmitted or coupled as intended. It is not solely the power directed to the coupled port.
High isolation is an undesirable characteristic for a directional coupler.
Answer: False
Explanation: High isolation is a highly desirable characteristic for a directional coupler, as it signifies minimal power leakage to the isolated port, ensuring proper signal directionality and preventing unwanted interference.
Directivity is defined as the ratio of power in the isolated port to the power in the coupled port when input is at Port 1.
Answer: False
Explanation: Directivity is defined as the ratio of power in the coupled port (Port 3) to the power in the isolated port (Port 4) when power is input at Port 1. The statement reverses this relationship.
Directivity can be calculated by summing the isolation and coupling measurements.
Answer: True
Explanation: Directivity is indeed related to isolation and coupling. Specifically, it can be calculated as the sum of the isolation (Port 1 to Port 4) and coupling (Port 1 to Port 3) values, when using appropriate definitions.
The coupling factor is defined as 20 log |κ| in terms of the coupling coefficient.
Answer: True
Explanation: This is the standard definition for the coupling factor in decibels, derived from the coupling coefficient (κ) which represents the ratio of coupled power to input power.
What does the coupling factor (C_{3,1}) measure in a directional coupler?
Answer: The ratio of power output from the coupled port to the input power, in dB.
Explanation: The coupling factor quantifies the amount of power transferred from the input port (Port 1) to the coupled port (Port 3), typically expressed in decibels.
What is the theoretical maximum value for the coupling factor of a passive directional coupler?
Answer: 0 dB
Explanation: For a passive device, the coupling factor cannot exceed 0 dB, as this would imply power gain. The maximum theoretical coupling is 0 dB, meaning all input power is coupled out.
Which of the following is a component of the total insertion loss in a real directional coupler?
Answer: Dielectric loss
Explanation: Insertion loss in practical devices includes dielectric losses within the materials, conductor losses, and any power not ideally transmitted or coupled. Amplification loss and coupling gain are not applicable here, and reflection loss is related to VSWR, not directly insertion loss components.
What is the desired characteristic for isolation in a directional coupler?
Answer: As high as possible
Explanation: High isolation is crucial for directional couplers to ensure that power does not leak into the isolated port, maintaining the device's directional properties and preventing interference.
How is directivity defined in relation to power levels?
Answer: Ratio of power from Port 3 to Port 4, with input at Port 1.
Explanation: Directivity quantifies how well the coupler directs power from the input (Port 1) to the coupled port (Port 3) versus the isolated port (Port 4). It is the ratio of power in Port 3 to power in Port 4, with input at Port 1.
In S-parameter terms, how is the coupling factor (in dB) calculated?
Answer: 20 log |κ|
Explanation: The coupling factor, when expressed in decibels, is calculated as 20 times the logarithm of the magnitude of the coupling coefficient (κ).
In a standard four-port directional coupler, Port 4 is designated as the input port.
Answer: False
Explanation: In a conventional four-port directional coupler, Port 1 serves as the input port. Port 2 is the transmitted port, Port 3 is the coupled port, and Port 4 is the isolated port.
The coupled port (Port 3) receives a portion of the power applied to the input port (Port 1) of a directional coupler.
Answer: True
Explanation: This statement accurately describes the function of the coupled port in a standard directional coupler configuration, where a fraction of the input power is directed to it.
Amplitude balance in a 3 dB hybrid coupler refers to the phase difference between the output ports.
Answer: False
Explanation: Amplitude balance specifically refers to the difference in power levels (in dB) between the two output ports of a hybrid coupler. The phase difference is a separate characteristic.
Branch-line couplers use branch lines spaced λ/2 apart to control coupling.
Answer: False
Explanation: Branch-line couplers utilize branch lines spaced λ/4 apart, not λ/2. The characteristic impedance of these branch lines is critical in determining the coupling characteristics.
The Wilkinson power divider uses bridging resistors to improve isolation and matching compared to simple T-junctions.
Answer: True
Explanation: This is a key advantage of the Wilkinson power divider. The inclusion of isolation resistors at the output ports significantly enhances isolation and impedance matching, overcoming the limitations of basic T-junctions.
A hybrid ring (rat-race) coupler is typically a 6 dB coupler made from a 3λ/2 transmission line.
Answer: False
Explanation: A hybrid ring coupler is typically a 3 dB coupler, not 6 dB. While it is constructed from a transmission line loop, the length is usually 3λ/2 for a rat-race configuration.
A hybrid ring coupler can function as either a 0° or a 180° hybrid depending on the input port.
Answer: True
Explanation: The phase relationship of the outputs of a hybrid ring coupler depends on which port is excited. Using Ports 1 or 3 as input typically results in a 0° (in-phase) hybrid, while using Ports 2 or 4 results in a 180° (out-of-phase) hybrid.
A magic tee combines an E-plane and H-plane tee to perform vector difference operations only.
Answer: False
Explanation: A magic tee, formed by combining E-plane and H-plane tees, is capable of performing both vector sum (Σ) and vector difference (Δ) operations on input signals, not just difference.
A standard 3 dB hybrid transformer produces output signals that are in phase (0° difference).
Answer: False
Explanation: A standard 3 dB hybrid transformer, often referred to as a 180° hybrid, produces output signals that are 180° out of phase with each other.
Simple resistive tee power dividers offer excellent isolation but suffer from high insertion loss.
Answer: False
Explanation: Simple resistive tee power dividers are characterized by high insertion loss (typically 6 dB for an equal split) and very poor isolation, not excellent isolation.
A 6 dB resistive bridge hybrid can achieve infinite isolation if the termination resistor matches the system impedance.
Answer: True
Explanation: This is a key property of a 6 dB resistive bridge hybrid; when the resistor at the fourth port is matched to the system impedance, theoretically infinite isolation is achieved.
The Lange coupler's design is similar to interdigital filters due to interleaved parallel lines.
Answer: True
Explanation: The Lange coupler's physical structure, featuring interleaved parallel lines, bears a resemblance to the geometry of interdigital filters, facilitating its design and analysis.
The Bethe-hole directional coupler is a complex waveguide implementation.
Answer: False
Explanation: The Bethe-hole directional coupler is generally considered a relatively simple and common waveguide implementation for achieving directional coupling.
The Wilkinson power divider's main advantage is its simplicity, despite poor isolation.
Answer: False
Explanation: The Wilkinson power divider's primary advantage is NOT its simplicity at the expense of isolation; rather, it is its excellent isolation and impedance matching, which are superior to simpler designs like T-junctions.
A 90° hybrid coupler in a balanced amplifier helps maintain a good input match by isolating reflections.
Answer: True
Explanation: In balanced amplifier configurations, a 90° hybrid coupler is crucial for directing reflected power from the amplifier stages to an isolated port, thereby maintaining a favorable input impedance match to the source.
The main disadvantage of a simple T-junction power divider is its high cost.
Answer: False
Explanation: Simple T-junction power dividers are generally inexpensive. Their primary disadvantages are poor isolation between output ports and significant insertion loss, not high cost.
Lines within a Wilkinson power divider typically have an impedance equal to the system impedance.
Answer: False
Explanation: The transmission lines within a Wilkinson power divider are typically designed with an impedance approximately √2 times the system impedance (e.g., around 70.7 Ω for a 50 Ω system) to achieve the desired performance characteristics.
The Lange coupler is primarily advantageous for achieving very loose coupling ratios.
Answer: False
Explanation: The Lange coupler is specifically designed for achieving tight coupling ratios, typically in the range of 3 dB to 6 dB, not loose coupling.
In a standard four-port directional coupler, what is the function of Port 2?
Answer: The transmitted port, outputting the majority of the input power.
Explanation: In a standard four-port directional coupler, Port 1 is the input, Port 3 is the coupled port, and Port 2 is the transmitted port, carrying the bulk of the input power.
What does 'amplitude balance' refer to in the context of a 3 dB hybrid coupler?
Answer: The difference in power (in dB) between the two output ports.
Explanation: Amplitude balance specifically addresses the power level difference between the two output ports of a hybrid coupler. An ideal 3 dB hybrid would have 0 dB amplitude balance.
Which type of coupler consists of parallel transmission lines connected by λ/4 branch lines?
Answer: Branch-line coupler
Explanation: A branch-line coupler is characterized by its structure of parallel transmission lines interconnected by quarter-wavelength (λ/4) branch lines.
What key problem does the Wilkinson power divider solve compared to simple T-junctions?
Answer: Poor isolation and impedance matching.
Explanation: The Wilkinson power divider significantly improves upon simple T-junctions by incorporating isolation resistors that provide excellent isolation between output ports and maintain good impedance matching.
What is a characteristic phase relationship between the output ports of an ideal, symmetric hybrid coupler?
Answer: 90 degrees
Explanation: An ideal, symmetric hybrid coupler typically produces output signals that are 90 degrees out of phase with each other.
A hybrid ring (rat-race) coupler is a type of:
Answer: 3 dB directional coupler
Explanation: The hybrid ring, or rat-race, coupler is a specific configuration that functions as a 3 dB directional coupler.
How can a hybrid ring coupler act as a 180° hybrid?
Answer: By using Port 2 or Port 4 as the input.
Explanation: The phase relationship at the output ports of a hybrid ring coupler is determined by the input port. Using Ports 2 or 4 as the input results in a 180° phase difference between the outputs.
What is the primary function of a magic tee in waveguide technology?
Answer: To perform vector sum (Σ) and difference (Δ) of signals.
Explanation: The magic tee is a specialized waveguide component designed to combine or separate signals based on vector summation and difference operations.
What is the phase relationship between the output ports of a standard 3 dB hybrid transformer?
Answer: 180° out of phase
Explanation: A standard 3 dB hybrid transformer, often called a 180° hybrid, produces outputs that are 180 degrees out of phase with each other.
What is a major disadvantage of a simple resistive tee power divider?
Answer: Very poor isolation between output ports.
Explanation: The primary drawback of simple resistive tee power dividers is their extremely poor isolation between the output ports, which can lead to signal leakage and interference.
How can a 6 dB resistive bridge hybrid achieve theoretically infinite isolation?
Answer: When the resistor at the fourth port equals the system impedance.
Explanation: A 6 dB resistive bridge hybrid achieves theoretically infinite isolation when the termination resistor at the fourth port is precisely matched to the characteristic impedance of the system.
The Lange coupler's design, featuring interleaved parallel lines, is similar to:
Answer: Interdigital filters
Explanation: The geometric arrangement of interleaved parallel lines in a Lange coupler is analogous to the structure found in interdigital filters, suggesting a shared design principle.
What is the primary advantage of the Wilkinson power divider?
Answer: It offers high isolation and good matching at all ports.
Explanation: The Wilkinson power divider is highly valued for its excellent isolation between output ports and its ability to maintain good impedance matching across all ports, which surpasses simpler power division techniques.
In a balanced amplifier, how does a 90° hybrid coupler improve the input match?
Answer: By directing reflected power to an isolated port.
Explanation: The 90° hybrid coupler in a balanced amplifier configuration redirects any reflected power from the amplifier stages to its isolated port, preventing it from returning to the input and thus improving the overall input match.
What is the primary drawback of a simple T-junction power divider?
Answer: Poor isolation between output ports
Explanation: Simple T-junction power dividers suffer from very poor isolation between their output ports, meaning signals can easily couple back between them, which is a significant limitation.
Zeroes on the main diagonal of an ideal directional coupler's S-matrix indicate reflections at the ports.
Answer: True
Explanation: In the context of S-parameters, zeroes on the main diagonal (S11, S22, S33, S44) signify that the input reflection coefficient is zero, indicating perfect impedance matching at all ports and thus no signal reflection.
For a lossless directional coupler, the sum of the squared magnitudes of the transmission and coupling coefficients must equal 1.
Answer: True
Explanation: This statement reflects the conservation of energy for a lossless device. The sum of the power transmitted and coupled out must equal the input power, which translates to | τ |^2 + | κ |^2 = 1 for the relevant coefficients.
Insertion loss is calculated using the coupling coefficient (κ) in S-parameter terms.
Answer: False
Explanation: Insertion loss is related to the transmission coefficient (τ) via the formula -20 log |τ|. The coupling coefficient (κ) is used to define the coupling factor.
An ideal, symmetric hybrid coupler's S-matrix shows a 90° phase difference between the outputs of Port 1 and Port 3.
Answer: False
Explanation: An ideal, symmetric hybrid coupler typically exhibits a 90° phase difference between its two output ports (e.g., Port 3 and Port 4 when Port 1 is input). The statement incorrectly refers to Port 1 and Port 3 as output ports with a 90° difference.
The notation P_{a,b} signifies a parameter 'P' at port 'a' influenced by an input at port 'b'.
Answer: True
Explanation: This notation is standard for indicating a parameter (P) associated with port 'a' that is a result of an input signal applied to port 'b'.
What do the zeroes on the main diagonal of an ideal directional coupler's S-matrix signify?
Answer: Perfect matching at all ports (no reflection).
Explanation: Zeroes on the main diagonal of the S-matrix (S11, S22, etc.) indicate that the input reflection coefficient is zero, meaning the ports are perfectly matched to the system impedance and no power is reflected.
For a passive, lossless directional coupler, what is the relationship between transmission (τ) and coupling (κ) coefficients?
Answer: | τ |^2 + | κ |^2 = 1
Explanation: This equation represents the conservation of energy for a lossless device. The sum of the squared magnitudes of the transmission coefficient (τ) and the coupling coefficient (κ) must equal unity, indicating that all input power is accounted for at the output ports.
How is insertion loss related to the transmission coefficient (τ) in S-parameter terms?
Answer: -20 log |τ|
Explanation: Insertion loss, when expressed in decibels, is calculated as -20 times the logarithm of the magnitude of the transmission coefficient (τ).
What does the notation P_{a,b} represent?
Answer: A parameter at port 'a' influenced by input at port 'b'.
Explanation: This notation is commonly used to denote a parameter (P) associated with port 'a' that is a consequence of an input signal applied to port 'b'.